Haltech E6K


All sensors, connectors, wiring and the ECU ECU and sensors ECU wiring loom split and a homemade junction box installed Original ECU connectors
 
The loom on its way out of the car The original loom Knock sensor wiring. The original loom was full of crimps, connecting "wires" to other "wires" Partially completed replacement loom
 
Almost completed. Note how much less wiring/connectors are required Wiring removed from the "old loom" The stock vs Haltech ECU Air temp sensor
 
   
ISC ditched and blanked off The air temp sensor temporarily installed