CP Pistons

CP obviously care about their product as they arrive well protected	Top of the piston	Machining marks are visible but cannot be felt!	Side view showing the dished nature of the top of the piston
Side view	Note the oil feed to the gudgeon pin	Piston side/skirt	There is a raised portion above the centre of the pin location hole, probably to add strength
Note the oil squirter cut out in the skirt	Above	The cut out for the oil squirter can easily be seen here along with the oil drain holes from the scraper rings

Notes

• Part No. SC7450
• Weight ~323g per piston, no pin, no rings
• Make sure you ask for the rings if you order a set!
• These are a better finish than the Ross Racing pistons
• Available in the UK from - Stanwood Engineering (01302) 710661